APC Back-UPS 1200VA, 230V, AVR, Schuko Sockets

Main features - Working time with 650W load: 1m 1s - Output power: 650 Watts / 1.2kVA - Rated output voltage: 230V - Rated input voltage: 230V - Input connection type: Schuko - Length of the cord: 1.2meters Exit - Maximum set power (W): 650 Watts / 1.2kVA - Output frequency (synchronized with the power grid): 50/60 Hz +/- 1 Hz Synchronized with the power grid - Topology: Linearly interactive - Type of voltage form: Stepwise approximation of a sine wave - Switching time: 6 ms typical : 10 ms maximum Entrance - Input frequency: 50/60Hz +/- 5 Hz Auto Detection - Input voltage range during mains operation: 140 - 300V - Number of power cables: 1 - Input power factor at full load: 0.54 Batteries and battery life - Battery Type: Lead acid battery - Typical recharge time: 8 hours - Rated battery voltage: 12 V - Expected battery life (years): 3 - 5 - Battery capacity in volt-ampere-hours: 108 Communication and administrative tools - Interface Port(s): 36 Pin Battery Mgmt, USB - Control panel: LED display with indicators on line (mains operation) : on battery (battery operation) - Beep: Signal to switch to battery mode : a special signal of battery exhaustion Surge protection and noise filtering - Burst energy rating: 273joules - Data Line Protection: Ethernet 10/100/1000 Base-T RJ45 protection Physical parameters - Maximum height: 190MM, 19.0cm - Maximum width: 140MM, 14.0cm - Maximum depth: 390MM, 39.0cm - Net weight: 7.6KG - Gross weight: 8.6KG - Dimensions of the transport package: 297x235x495MM - Color: Black Environmental Parameters - Operating temperature: 0 - 40 °C - Operating range of relative humidity: 0 - 95 (Non-condensing)% - Operating range of altitude above sea level: 0 - 3000 meters - Storage temperature: -15 - 40 °C - Relative humidity of storage: 0 - 95 (Non-condensing) % - Storage height above sea level: 0 - 3000 meters - Acoustic noise level at a distance of 1 m from the surface of the device: 40.0dB(A) - Protection class: IP20 Accordance - Compliance with the requirements of: CB, CE, EAC, EN/IEC 62040-1, EN/IEC 62040-2